#Bmw idrive 7 hidden feature code#

If you have a BMW that’s programmed to automatically fold the side mirrors when the car is parked, they can also unfold automatically when you reach 25 mph without any human involvement.ĭid you know you are able illuminate just one side of your lights, whilst the car is parked? This is useful if you are parked on the side of a dark road to make your car visible. This option might require coding, but no additional hardware. The mirrors will auto dip so you can see the ground behind your car. To accomplish this all you have to do is hold the switch on the left hand side and put the vehicle into reverse. Using the switch that’s allows you to change from the driver's side mirror to passenger's side mirror will also let you automatically adjust both mirrors when going into reverse. #3 Automated Side BMW Mirrors Reverse Mode Lastly, the ‘Fan’ symbol will activate and start to flash when the system is switched on.Next, either activate timer 1 or timer 2.Set the desired time for the comfort ventilation to start.Then set up the BMW parked-car ventilation timer, and select timer 1 or timer 2.To activate the comfort ventilation follow these steps found in your iDrive menu: Your BMW has the option to set a timer for the fan (not climate control), this is most beneficial in hot climates where you need to get the air circulated to avoid getting into a hot stuffy car.

#Bmw idrive 7 hidden feature code#

All wiring is already in place, so its plug in play, and to code it is just a series of holding a combination of buttons. All you need is a used mirror with a homelink system and replace it with your current mirror. However not all BMWs do not have this feature, and if you are the unlucky few the installation is quiet simple that requires no tools or special coders. The garage door opener for your BMW 3 Series is located under the rear view mirror. What other secret features does my 2018-2025 3 Series keep hidden? #1 BMW Garage Door Opener If for example your VIN is XX12345, you take the last 5 digits (12345 in this case), and add them all up, so 1+2+3+4+5=15. Unlock code needs to be calculated from adding the last 5 digits of your VIN number together.

to be able to adjust the baseline '1000' mpg calculation correction factor.

various counters, that accumulate during the lifespan of the vehicle.

raw temperature values of various components and sensors.

You are redirected to the secret menu with the additional menu items:.

Tap the odometer repeatedly until the correct code is selected (read below, to get your code).

Select 'Unlock' and hold the odometer/BC button until 'Code 00' is shown.

What is the Unlock menu, and how do I get into it?

disable all safety electronics, so that you can dyno the car properly without the car interfering with the raw output.

VIN number and hardware versions and other statistics.

To enter the menu you would need to long press the odometer/BC button:.

The below options will appear on your screen and can be navigated by pressing the odometer/BC button once.

Press and hold the button to reset the odometer/BC button until 'Diagnostic Mode Active' appears.

Press the Start/Stop button 3 times very fast.

To access these hidden menus you have to:

Actual VIN number of the car – useful when buying the car and want to make sure that all matches to what is in the engine bay.

Fuel sender unit debugging by knowing how many litres of fuel are currently in the tank.The current speed readout in a digital format – useful when comparing your speedometer's accuracy with an external GPS.Light up your dashboard like a Christmas tree - useful to find faulty lights.Be able to switch the temperature units readout from Celsius to Fahernieht or vice versa.